Call Us:
Fast Nationwide Shipping
28 Day Returns & Exchanges
Meets Aus. Safety Standards
Simple, Secure Checkout
Further development of our ultimate directly laminated jacket, developed for touring and adventurous riders in all conditions.
The Ultimax 2.0 is an adventurous all-season touring jacket meant for all riding conditions. The waterproof Raintex membrane is directly laminated – which prevents the outer layer from soaking up water and getting soggy and cold – and the thermal liner is detachable. Directly laminated garments also dry much faster compared to other waterproofing methods.
This jacket features a double front zip, with both zips being slightly off-centred and located behind each other, creating a zig-zag construction with the waterproof flap for increased waterproofness.
A deployable hood that’s worn underneath the helmet and lets you create a fully waterproof connection between your helmet and jacket is also present. The Storm Hood prevents water from entering the jacket via the collar.
The Ultimax 2.0 also features two waterproof Aqua Stop ventilation zips at the front, an air outlet at the back, and a connection zip at the back to connect it to your (Ultimax) pants.
Reflection is present at the sides in the form of discreet Side Eye™ accents. Critical areas are extra reinforced with synthetic nubuck; a leather fabric often used to reinforce the palms of gloves.
This jacket comes with our very own Easy Cuff™; a system that makes use of a zip – instead of loops and snaps – to keep everything in place. This nifty spec connects the detachable layers to each other and prevents your hand, wrist or watch from getting stuck when putting on or taking off your jacket.
A series of loops called the Electric Power Guide™ is present throughout the inside of the jacket. This enables you to run power cables through the sleeves with full freedom of movement and no bulk at the wrists.
In addition, this jacket is Thermax™ prepared, which means a heated Thermax™ jacket such as our Nucleo or Nuclea can be fitted inside.
Other in-house developed differentiators are the Quick Access Puller™ that enables quick and easy access to the inner chest pocket. The Coat Hanger™ at the back is durable as it is developed to actually carry the weight of a motorcycle jacket.
At the lower left arm we’ve fitted a Card Pocket in the outer shell to store an access card or other means of identification or payment to minimise time lost at mandatory stops such as tollbooths.
Both shoulders and elbows are protected by our own CE level 2 RISC™ protectors. This jacket is also prepared for numerous safety upgrades such as protectors for your back and chest, a high-viz vest that doesn’t interfere with the jacket, and a Vision 2C LED light which goes at the top of your back.
The Ultimax 2.0 is what we call rain riding gear!
Thermax™ prepared
The motorcycle jacket is prepared for a Thermax™ jacket to be fitted inside after removing the thermal liner. A Thermax™ jacket is a separately wearable, electrically heated jacket that can also be fitted inside a motorcycle jacket.
Vision Tech vest prepared
Adjustable elbow protection
The position of the elbow protector can be adjusted to provide optimal comfort and impact protection. Depending on the garment, you can choose different pockets/positions, or you can place it exactly where you want in case of a velcro connection.
Back Pocket™
SINCE 2014
Coat Hanger™
SINCE 2007
A motorcycle jacket often weighs (a lot) more than a regular jacket. You might notice it when wearing one, and maybe even more when taking it off and carrying it by the ‘Coat Hanger™’ at the neck – which is often just a textile loop that eventually snaps due to the weight of your motorcycle jacket.
Electric Power Guide™
Our Electric Power Guide™ (EPG) is a series of loops at the arms and shoulders of the thermal liner.
DYNA CUFF™
SINCE 2018
Chances are likely that your arms are shorter or longer than ours. Truth is, no two bodies are the same. For some riders, finding a suitable jacket is an event they can hardly look forward to. Most jackets are either too long or too short, or they fit well but the sleeves are simply too long.
Easy Cuff™
SINCE 2009
Loops and snaps that are supposed to neatly connect the separate layers of a jacket or pants. We all know how well that works; it doesn’t. Chances of your watch or foot getting stuck are ten times higher than of you actually putting on the garment without issues.
Ergo Pocket™
Ergonomically designed pockets between the back and sides of the jacket. The pockets are positioned in a way that enables easy access when reaching for one of them.
RISC™ chest protector prepared
SINCE 2021
Raintex DL
The breathable and waterproof Raintex membrane is laminated directly against the outer shell, which prevents the garment from soaking up water and becoming cold and heavy. As a result, DL clothing also dries much faster.
RISC™ back protector prepared
The construction features a designated compartment on the inside that enables our RISC back protector to be placed.
RISC™ knee/elbow protector
(KE01, KE02, KE03)
Storm Hood
A deployable hood that’s worn underneath the helmet and lets you create a fully waterproof connection between your helmet and jacket. Prevents water from entering the jacket via the collar.
